BGVMH - 17043 GOLD GLOSS ENAMEL, X-5363
- MSDS: BGVMH
- Manufacturer: FARWEST PAINT MANUFACTURING CO
- Product Name: 17043 GOLD GLOSS ENAMEL, X-5363
- National Stock Number: 8010-00N009949
Product Identification
Product ID:17043 GOLD GLOSS ENAMEL, X-5363
MSDS Date:02/21/1986
FSC:8010
NIIN:00N009949
MSDS Number: BGVMH
Responsible Party
TUKWILA, WA 98168
Emergency Phone: 206-941-1619;206-244-8844
Info Phone: 206-944-8844
Cage: 2F266
Contractor
Telephone: 206-244-8844
Cage: 6F266
Ingredients
ALIPHATIC HYDROCARBONS.VP 15 MMHG @ 100F.PEL 250 PPM (MFR).
Fraction By Weight: 60-65%
OSHA PEL N/K
ACGIH TLV: N/K
VEHICLE,RESIN.VP 2.0 MMHG @ 68F.PEL 100 PPM (MFR).
Fraction By Weight: 30-35%
OSHA PEL N/K
ACGIH TLV: N/K
PIGMENTS.GOLD PIGMENT IN THIS PROD IS MOSTLY BRONZE & CU
Fraction By Weight: 3-8%
OSHA PEL N/K
ACGIH TLV: N/K
METAL SOAP DRIERS.VP 2.00 MMHG @ 68F.PEL 500 PPM
Fraction By Weight: <2%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS.
Explanation of Carcinogenicity:NONE.
Effects of Overexposure:EYES:SEV IRRIT,REDNESS,TEARING,BLURRED
VISION.SKIN:RPTD/PRLNG CONTACT CAN CAUSE MOD
IRRIT,DEFATTING,DERMATITIS.INGEST:GI IRRIT,NAUSEA,VOMITING,&
DIARRHEA.ASPIR INTO LUNGS CAN CAUSE CHEM PNEUMONITIS WH ICH CAN BE
FATAL.INHAL:NASAL & RESP
IRRIT,DIZZINESS,WEAKNESS,FATIGUE,NAUSEA,HEADACHE,POSS UNCON & EVEN
ASPHYXIATION.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYES:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MIN,LIFTING LIDS OCCASIONALLY.GET MED ATTN.SKIN:THOROUGHLY WASH
EXPOSED AREA W/ SOAP & WATER.REMOVE & LAUNDER CONTAM CLOTHING
BEFORE REUSE.INGEST :DO NOT INDUCE VOMITING.KEEP PERSON WARM,QUIET
& GET MED ATTN.INHAL:MOVE TO FRESH AIR.IF BREATHING IS
DIFFICULT,GIVE O*2.IF BREATHING IS STOPPED,GIVE ARTIF RESP.KEEP
WARM,QUIET.GET MED ATTN.
Fire Fighting
Flash Point Method:TCC
Flash Point:100F,37C
Lower Limits:N/K
Upper Limits:1.0%
Extinguishing Media:FOAM,CO*2 AND DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NEVER USE NEAR OR AROUND WELDERS OR
CUTTING TORCHES.DRUM (EVEN EMPTY) CAN IGNITE EXPLOSIVELY.RESIDUE
CAN IGNITE EXPLOSIVELY.
Accidental Release
Spill Release Procedures:SMALL SPILL:ABSORB LIQ ON ABSORBENT
MATRL;TRANSFER TO HOOD.LRG SPILL:ELIM ALL IGNIT SOURCES.EXCLUDE
PERSONS W/O PROT EQUIP FROM AREA.STOP SPILL AT SOURCE,DIKE,PUMP LIQ
TO SALVAGE TANK.TAKE UP REMAININ G LIQ W/ ABSORB MATL.PREVENT
RUNOFF (SEE_SUP DATA)
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:CONTAINTERS MAY BE HAZ WHEN
EMPTIED.SINCE EMPTIED CONTAINERS RETAIN PROD RESIDUES (VAP,LIQ &/OR
SOLID) ALL HAZ PRECAUT IN THIS SHEET MUST BE OBSERVED.
Other Precautions:N/K
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:RESISTANT GLOVES SUCH AS NITRILE RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED SKIN
CONTACT,WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:KEEP WORK AREA CLEAN AND FREE FROM LEAKS,AND
SPILLS.THOROUGHLY WASH HANDS W/ SOAP & WATER BEFORE HANDLING FOOD &
DRINK.
Supplemental Safety and Health
SPILL/RELEASE PROC:TO SEWERS,STREAMS,OR OTHER BODIES OF WATER.IF
RUN-OFF OCCURS NOTIFY PROPER AUTHORITIES AS REQUIRED.
Chemical Properties
Boiling Pt:B.P. Text:190F,87.8C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:>AIR
Spec Gravity:0.98 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:GOLD MEDIUM VISCIOUS LIQUID WITH A MILD SWEET
AROMATIC ODOR.
Percent Volatiles by Volume:60-65
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP AWAY FROM OPEN FLAMES,SPARKS,AND
HEAT.DO NOT WELD NEAR OR AROUND PRODUCT.
Hazardous Decomposition Products:N/K
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.